How to Restore a Leather Saddle

Co-authored by Marc Sigal and Janice Tieperman

Last Updated: August 25, 2021 References

Old leather saddles are beautiful in their own right, but they may look a little worse for wear if they haven’t gotten a lot of TLC recently. Restoring a leather saddle definitely requires some elbow grease, but it’s not as intimidating or confusing as you may think. This guide breaks down some common questions to help you return your old riding equipment back to its former glory.

Question 1

Question 1 of 5:
Do you need to take apart your saddle?

1
Yes, and you’ll need a screwdriver and nippers to do so. Take off the girth, as well as the stirrups and conches. It may also help to loosen the back and side jockeys before you start cleaning and restoring. Use the screwdriver and nippers to take out any nails in the leather.^{[1]
X
Research source}
- If any parts of your saddle are broken, make sure to replace them before using your equipment again.

Question 2

Question 2 of 5:
How do you clean an old saddle?

1
Wash it with traditional soap and saddle soap. Soak down the saddle with a hose and clean off the surface with a soft-bristled brush and bar soap. Rinse off the suds with water, and wait for your saddle to air-dry. Then, clean it off again with saddle soap and a toothbrush, so you can reach any tricky, difficult-to-clean spots.^{[2]
X
Research source}
- Murphy’s Saddle Soap and any other glycerin-based saddle soap work great for this.^{[3]
  X
  Research source}
2
Use leather detergent concentrate if regular soap doesn’t get the job done. Regular, glycerin-based soap might not clean your saddle if your equipment is really old and worn out—that’s okay! Dilute your leather detergent concentrate and scrub it onto the leather with a soft-bristled brush. Once you’ve cleaned off the entire surface, rinse it off with clean water.^{[4]
X
Research source}
- Follow the diluting instructions on your cleaning product. Some products recommend mixing 2 to 4 fl oz (59 to 118 mL) of leather detergent concentrate with 1 US gal (3.8 L) of cold water.^{[5]
  X
  Research source}

Question 3

Question 3 of 5:
How do you restore hard or brittle leather?

1
Treat the leather with oil. Heat up leather oil on your stovetop until it’s around 100 to 110 °F (38 to 43 °C). Spread the oil over the surface of the saddle and leave it be for several hours. If the leather still feels dry, apply a little more oil to the tack.^{[6]
X
Research source}
- Don’t apply too much oil at once! You can always use more later, if needed.
- Double-check the instructions on your leather oil before using it to condition your tack.
2
Use a leather rejuvenator. Some professionals like using leather rejuvenators to restore tough leather.^{[7]
X
Research source} Sponge down both sides of the leather with lukewarm water; then, cover the area in plastic wrap for 2-6 hours. Peel away the plastic and coat the leather with the rejuvenator. Re-cover the leather with plastic, and let it sit for 1 day. Afterwards, you can remove the plastic and let your saddle air-dry.^{[8]
X
Research source}
- Don’t apply leather rejuvenator to any metal parts of your saddle, or else they might get damaged.
- Leather rejuvenator dries best in a 60 to 70 °F (16 to 21 °C) area with 40-60% humidity.

Question 4

Question 4 of 5:
Can I fix cracked leather?

1
That may be tempting, but it’s not a good idea. Cracks in leather happen when the proteins within the leather shrink and break apart. Because of this, there’s no way to restore those parts of your leather back to their former glory. You’re better off getting new equipment if you’re looking to ride.^{[9]
X
Research source}

Question 5

Question 5 of 5:
What if the saddle is moldy?

1
Take it apart and give it a good cleaning. Combine 1 part of white vinegar into a container with 2 parts water. Dip a clean rag and toothbrush into the mixture and clean the saddle. Let your saddle air-dry, and then wash it with non-glycerine saddle soap. Then, treat your saddle with balsam or dressing to make it supple.^{[10]
X
Research source}
- It’s best to wash moldy tack outside, so the spores don’t spread to anything else.

Community Q&A
Did you know you can get expert answers for this article? Unlock expert answers by supporting wikiHow

Question

How do you use leather conditioner?

Marc Sigal
Leather Care Specialist
Marc Sigal is the Founder of ButlerBox, a dry cleaning and shoe care service based in Los Angeles, California. ButlerBox places custom-designed, wrinkle-resistant lockers in luxury apartment buildings, class A office buildings, shopping centers, and other convenient locations so you can pick up and drop off items 24 hours a day, 7 days a week. Marc has a BA in Global and International Studies from the University of California, Santa Barbara.

Marc Sigal

Leather Care Specialist

Expert Answer

Support wikiHow by unlocking this expert answer.

Use a soft-bristled brush or a microfiber towel to apply the conditioner in a thin layer all over the leather. Wait a few minutes to let it dry, then brush off any excess conditioner.
Question

Do you recommend dyeing leather saddles where the the color has faded or worn off?

Equestriangoose

Top Answerer

It depends on your personal preferences. You can re-dye it if you like, but you can always simply embrace the worn look. Somebody did a lot of riding to get there, and a lot of people are proud of the worn spots. To me it would be a shame to cover that up. It isn't hurting the horse, so "don't fix what ain't broke". It is really up to you, though.