X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 38,301 times.
Learn more...
Making rag balls was once a practical way of scavenging every last bit of usable cloth, usually to be sewn into a rag rug later. You can still make rag balls for eventual use in crafts, or as a homey Southern-style decoration.
Steps
-
1Collect old sheets, old clothing or fabric yardage. You'll need 1 to 2 yards (0.9 to 1.8 m) of fabric per rag ball.
-
2Snip into the edge of your fabric with sharp scissors.
- Always snip in line with the grain of your fabric. In other words, look carefully at the fabric, determine which way the fibers run, and cut in the same direction. This ensures that your fabric will tear easily and evenly.
Advertisement -
3Grasp the fabric on either side of the snip and pull it apart. Cotton, in particular, will tear easily along the grain.
-
4Tear the fabric to about 1 inch (2.5 cm) away from the opposite edge.
- You can tear all the way through the edge of the fabric, but you'll end up with a pile of strips that you have to knot or sew together. If you stop 1 inch away from the edge, you can create 1 long strip of fabric from any square or rectangular piece.
-
5Turn the fabric around and make another snip to start a new tear, 1/2 to 1 1/2 inches (1.25 to 3.75 cm) away from the previous tear.
- The heavier your fabric is, the wider the strips you should tear.
-
6Grasp both sides of the snip you just made and tear again. Use even, controlled force to make a smooth tear, and stop 1 inch (2.5 cm) from the far side of the fabric (this is the edge you first started tearing from).
-
7Make another snip in the far side of the fabric, the same width away from the last tear as the one before that.
-
8Continue ripping back and forth across the fabric, stopping about 1 inch (2.5 cm) from the edge with each tear you make. The result is 1 long, continuous zig-zag piece of fabric.
- Once you've cut the entire sheet, rag or piece of fabric into strips you're ready to roll it into a ball, just like you'd roll a ball of yarn.
-
9Wrap 1 end of the long rag strip you created around your fingers 8 to 10 times.
-
10Slide the loops you just wrapped off your fingers. Pinch them together and continue wrapping the long rag strip around the loops, this time perpendicular to the original wraps.
-
11Alter the directions of your wraps as the ball begins to take shape. As long as you do an equal number of horizontal, vertical and diagonal wraps, you should end up with a reasonably round rag ball.
-
12Tuck the end of the yarn wrap under 1 of the previous loops to secure it.
-
13Store your rag balls in a basket for a Southern-style decoration, until you're ready to use them.Advertisement
Things You'll Need
- Old sheets, clothes or cloth yardage
- Sharp scissors
About This Article
Advertisement








